Florida Transcor, Inc. - Pavement Marking Equipment and Supplies

Pavement Marking Supplies

Parking Lot Accessories and Equipment

Delineators and Object Markers

Traffic Control Products

Signs and Hardware

ADA Supplies

Pavement Marking Equipment
·Graco Paint Stripers
·Intermediate Paint Stripers
·Palletized Paint Stripers
·Thermoplastic Applicators
·Thermoplastic Premelters
·Line Removers/Grinders
·Preformed Thermoplastic Equipment
·Epoxy Dispensers
·Bitumen Applicators
·Glass Bead Dispensers
·Blowers
·Sealcoat Applicators & Tips


Pavement Marking Equipment > Palletized Paint Stripers

Model CH300 Palletized Marking Machine Select for larger image

Model CH300
Palletized Atomized Air Spray
Pavement Marking Machine

The productivity and features found on large truck mounted stripers at a fraction of the cost. Capacity sizes from 40 to 120 gallons allow you to customize the unit based on the amount of striping required.

 
Basic specifications based on 60 gallon capacity model.  
Paint System:
Capacity: 60 gal. (2-30 gal AMSE Pressure tanks)
Paint Guns: Two (2) automatic stainless steel on switchable carriage
(Optional additional gun on additional carriage arm)
Spray System:
Pump(s): One hydraulic hi-pressure airless (2.5 GPM)
Engine: 18 HP, air cooled, V-twin, gas
Air Compressor: Electronic, includes footage counters

Solvent Supply:
Capacity: 5 gal. (1-pressurized tank)
Bead System:
Capacity: 350 lbs.
(1- pressurized tank)
Bead Guns: Two (2) automatic pressure on switchable carriage arm
Skipline System:
Electronic , includes footage counters

Truck Capacity Requirements:
3/4 Ton pickup

Model CH300A
Palletized Airless Spray
Pavement Marking Machine

Palletized 60 gallon capacity airless spray pavement marking machine. Unit is fully waterborne compatible and allows for striping from left or right side of machine; comes standard with one airless paint pump. The CH300A is designed for use with either single driver/operator or with separate driver and rear operator. Many options available. Unit shown with optional stainless steel tanks.

 

 Model CH300A Palletized Marking Machine Select for larger image
Paint System:
Capacity: 60 gal. (2-30 gal Non-pressure, Polyethylene tanks)
Paint Guns: Two (2) Graco airless mounted on switchable carriage
(includes handgun with 50' hose)
Spray System:
Pump(s): One (1) @ 2.5 GPM each, hydraulic, hi-pressure airless
Engine: 18 HP, air cooled, V-twin, gas
Air Compressor: 10.6 CFM
Bead System:
Capacity: 360 lbs.
(1- pressurized tank)
Bead Guns: Two (2) stainless steel automatic mounted on switchable carriage
Skipline System:
Electronic , includes footage counters

Truck Capacity Requirements:
3/4 Ton pickup

1-800-760-7604

© 2009 Florida Transcor | Home | Map and Location | Contact Us
Map and LocationContact UsReturn to HomeReturn to Home