Florida Transcor, inc.> Pavement Marking Equipment

Pavement Marking Supplies

Parking Lot Accessories and Equipment

Delineators and Object Markers

Traffic Control Products

Signs and Hardware

ADA Supplies

Pavement Marking Equipment

·Graco Paint Stripers
·Intermediate Paint Stripers
·Palletized Paint Stripers
·Thermoplastic Applicators
·Thermoplastic Premelters
·Line Removers/Grinders
·Preformed Thermoplastic Equipment
·Epoxy Dispensers
·Bitumen Applicators
·Glass Bead Dispensers
·Blowers
·Sealcoat Applicators & Tips

Pavement Marking Equipment > Thermoplastic Premelters

Model TT Series Premelters

The TT Series offers the ability to adapt to any transport option needed. 20" Power cords, LP hoses and hydraulic hoses allow LP bottles, power-pack, and premelter to be mounted independently for added safety and versatility.

Optional features include:

Oil jacketed Cylinders
Diesel Power-pack Engines
Custom Specified Engine/HP
Fork Lift Pockets
Stainless Steel Knife Gate Valves

600 lb. units and up are equipped with automatic spark ignition systems allowing burners to be ignited with a simple switch.

Thermoplastic Premelter Model Numbers
Model Number	Material Capacity	Burner Rating	Standard Engine	Agitation
TT350SM Single Unit	350 LBS.	25,000 BTU	N/A	Manual
TT600SH Single Unit	600 LBS.	140,000 BTU	8 HP LP Elec. Start	Hydraulic
TT600DH Dual Unit	1200 LBS. (2 x 600)	140.000 BTU x 2	8 HP LP Elec. Start	Hydraulic
TT1200SH Single Unit	1200 LBS.	250,000 BTU	8 HP LP Elec. Start	Hydraulic
TT1200DH Dual Unit	2400 LBS. (2 x 1200)	250,000 BTU x 2	8 HP LP Elec. Start	Hydraulic
TT2000SH Single Unit	2000 LBS.	300,000 BTU	8 HP LP Elec. Start	Hydraulic
TT2000DH Dual Unit	4000 LBS. (2 x 2000)	300,000 BTU x 2	8 HP LP Elec. Start	Hydraulic
TT3000SH Single Unit	3000 LBS.	400,000 BTU	8 HP LP Elec. Start	Hydraulic
TT3000DH Dual Unit	6000 LBS. (2 x 3000)	400,000 BTU x 2	8 HP LP Elec. Start	Hydraulic

Custom size units availabe

Flash safe material feed doors designed to prevent injury to operator.

Hydraulic and LP hoses connect and disconnect instantly without leakage, allowing the unit to be loaded and unloaded safely and easily.

Burner ring slides out on rack, allowing for easy service of jet burners.

Please contact us for download access to pricing or quote on TT & TP Series Thermoplastic Premelters.

Transcor Premelters come standard with LP fuel engines. Specify air or oil jacket when inquiring about units. Capacities other than standard models may be requested. Specifications and ratings on units are subject to change without notice. HP ratings on power pack engines may vary depending on accessories. Contact Florida Transcor for detailed specification on unit desired.

Model TP1200 Trailer Mounted Thermoplastic Premelter & Applicator Packages
Shown with optional extrusion die racks, hydraulic lift gate, and flashers
TP1200 packages offer an efective solution for a completely portable themoplastic workstation. Packages come standard with a CH265M handliner, including a 4" or 6" extrusion die. The burner system is fueled by a low pressure LP system controlled by a solid state, electronic thermostat. The TP1200's combination of fast start-up time, safety, and quality will deliver productive service for many years. Custom size units availabe

Standard Trailer eatures Include: Four LP Bottle Racks LP Fired Power Supply Handliner Loading Ramp Tandem Axles Electric Brakes	Optional Features Include: Hydraulic Lift Gate (in lieu of ramp) Hydraulic Crane (in lieu of ramp) Diesel Engine (in lieu of propane engine) Oil Jacketed Premelter(s) Die storage racks Overnight heating system
Single units and custom sizes available



WS Series Self Contained Portable Units	TT350SM Light Weight Manual Unit
Workstations can be constructed to retrofit onto truck beds, trailers, etc. Units can be built to any size, with added options such as: Diesel Engine (in lieu of propane engine) Oil jacketed kettle Over-Night Heating System Material Storage Area Handliner Storage Area WS units are built to customer specifications. Please contact us for quote.	An inexpensive solution for pre-melting thermoplastic, crack fill, bituminous, or any other hot applied material for road markings or repairs. The TT350SM features quick-connect LP hoses and can be loaded by hand for portability. Standard features include: All steel 25 gallon (350 lb.) kettle Manual full sweep agitator 25,000 BTU burner system Automatic thermostat with pilot safety valve 175 lb. weight (empty)

1-800-766-7604