Florida Transcor, inc.> Pavement Marking Equipment >Bitumen Applicators

Florida Transcor, Inc. - Pavement Marking Equipment and Supplies

Pavement Marking Supplies

Parking Lot Accessories and Equipment

Delineators and Object Markers

Traffic Control Products

Signs and Hardware

ADA Supplies

Pavement Marking Equipment

·Graco Paint Stripers
·Intermediate Paint Stripers
·Palletized Paint Stripers
·Thermoplastic Applicators
·Thermoplastic Premelters
·Line Removers/Grinders
·Preformed Thermoplastic Equipment
·Epoxy Dispensers
·Bitumen Applicators
·Glass Bead Dispensers
·Blowers
·Sealcoat Applicators & Tips

Pavement Marking Equipment > Bitumen Applicators

Model RBM350 Bitumen Applicator
The RBM350 is a fully equipped bitumous applicator capable of switching from a walk-behind unit to a self-propelled unit in moments.
The RBM350 with the optional Marker Driver is the only one man operation, auto-propelled bitumen applicator, yet still portable enough to be transported on a regular pickup truck.
	Shown with the optional MarkerDriver

25 gallon(350 lb)(159kg) capacity
One discharge valve on left side of kettle
One 25,000 BTU burner controlled by a safety pilot valve and automatic thermostat
LP bottle cage supports 25-40 lb tanks
All steel frame and kettle - Frame is protected by a durable epoxy paint
Lightweight - 300 lb (136kg)

Optional Equipment

2nd discharge valve on right side of kettle
Foot actuated parking break
RMD350 MarkerDriver Auto-Propulstion system

Model 50150 Bitumen Applicator/Crack Filler

65lb (30kg) capacity
One discharge valve on right side of kettle (optional 2nd discharge valve on left side of kettle available)
One 250,000 BTU burner controlled by a regulating needle valve (optional thermostat control available)
LP bottle cage supports 25-40 lb tanks
All steel frame and kettle
Frame is protected by a durable epoxy paint
Two rear swivel wheels for maneuberability
Lightweight - 90 lbs (40kg)

Model 2001 Ride-on Trailer Bitumen Applicator

Streamline the back breaking redundant work of marker application with the Model 2001 Bitumen applicator. Time spent applying markers will be done in a fraction of the time you will spend pushing a walk behind cart, saving you time and money.

Simply hook the unit up to your pick up truck, load the trailer up with markers and go.

While seated, you will have access to your markers, a bitumen dispensing wand, a foot pedal to actuate flow, and the pavement easily within reach.

The unit is fully self contained allowing traffic flow in adjacent lanes while applying markers.

Model 2001 Ride-On Trailer Bitumen Applicator

2000 Watt generator
2.50 CFM compressor
8 HP LP engine
Optional electric start
24 gallon material tank (Optional 39 gallon tank) . 60,000 BTU burner system
Solid State Controller with LED Display
All pipe flow line with 18" travel
Foot flow control switch

1-800-766-7604